PRODUCT
- 400-085-9099
- bentonite@zjhuate.com
- www.zjhuate.com
- Zhejiang province Anji County high Yu Zhejiang Tianzi Lake modern industrial park
Rheology Modifier BP-500A-0
BP-500A-0 belongs to the unconventional type of organoclays group, being an easy-to-disperse, self-activated organoclay.
1. Advantages:
Ø High gelling efficiency over low to medium polarity organic liquids,especially in toluene, xylene, 200#solvent oil, naphtha and other aromatic and aliphatic compound.
Ø Consistent in rheology and thixotropy development.
Ø Good anti-sagging property and anti-sediment property.
Ø Easy of dispersion
2. Typical Properties:
3. Typical Applications:
4. Incorporations:
BP-500A-0 belongs to the unconventional type of organoclays group, being an easy-to-disperse, self-activated organoclay, BP-500A-0 does not require a chemical (polar) activator to reach the proper level of delamination of the organoclay platelet stacks.
It can also be added while grinding or after grinding without polar activator. If add it into low polar solvent systems first, better performance can be expected. Meanwhile, high speed shear can also imrove the dispersion greatly.
5. Recommended Levels:
The amount of BP-500A-0 Rheology Modifier required depends upon the type of organic system and the degree of thickening or other properties desired. Addition levels are typically between 0.3%-2.5% based on the total formulation weight.
6. International Countertype: Bentone®SD-1,Claytone® AF
7. Packaging and Storage:
Brown paper packages plus internal polyethylene film bags,or paper packages with valve mouths are used.The weight of each package is generally 25±0.25 kg according to customer demands
Ø High gelling efficiency over low to medium polarity organic liquids,especially in toluene, xylene, 200#solvent oil, naphtha and other aromatic and aliphatic compound.
Ø Consistent in rheology and thixotropy development.
Ø Good anti-sagging property and anti-sediment property.
Ø Easy of dispersion
2. Typical Properties:
| Color | Appearance | Density |
Moisture (@105℃,2hrs) |
Fineness through 200 mesh |
Loss on Ignition ( @1000℃ ) |
| Light Yellow | Free Flowing Powder | 1.5g/cm3 | ≤3.5% | ≥95% | ≤40% |
| ●Alkyd paint | ●Bituminous paint |
| ●Solvent epoxy paint | ●Inks(Mineral oil) |
| ●Polyester paint | ●Chlorinated rubber paint |
| ●Adhesive |
4. Incorporations:
BP-500A-0 belongs to the unconventional type of organoclays group, being an easy-to-disperse, self-activated organoclay, BP-500A-0 does not require a chemical (polar) activator to reach the proper level of delamination of the organoclay platelet stacks.
It can also be added while grinding or after grinding without polar activator. If add it into low polar solvent systems first, better performance can be expected. Meanwhile, high speed shear can also imrove the dispersion greatly.
5. Recommended Levels:
The amount of BP-500A-0 Rheology Modifier required depends upon the type of organic system and the degree of thickening or other properties desired. Addition levels are typically between 0.3%-2.5% based on the total formulation weight.
6. International Countertype: Bentone®SD-1,Claytone® AF
7. Packaging and Storage:
Brown paper packages plus internal polyethylene film bags,or paper packages with valve mouths are used.The weight of each package is generally 25±0.25 kg according to customer demands
