PRODUCT
- 400-085-9099
- bentonite@zjhuate.com
- www.zjhuate.com
- Zhejiang province Anji County high Yu Zhejiang Tianzi Lake modern industrial park
Polyamide Wax HT-8800
HT-8600 polyamide wax micropowder is a 100% active, powder polyamide wax thixotropic agent specially designed for solvent-based and solvent-free, high-solids coating systems and inks, adhesives, seala
Description
HT-8600 polyamide wax micropowder is a 100% active, powder polyamide wax thixotropic agent specially designed for solvent-based and solvent-free, high-solids coating systems and inks, adhesives, sealants, greases, etc. This product could be dispersed with heat generated during grinding and establish the thixotropic viscosity, control the sag and prevent sedimentation.
Typical Physical Data
Advantages
Ø☆100% active, consequently better cost/ performance.
Ø☆Can effect just dispersed on a heat generating grinder.
Ø☆Strong anti-sagging and maintained anti-settling.
Ø☆Very little trouble such as poor recoating, delamination and the like.
Ø☆No seeding with paints during storage.
Applications
It can be applied to various solvent-based, solvent-free, high-solids systems, especially suitable for heavy-duty anti-corrosion systems such as epoxy and chlorinated rubber coatings.
Addition Level
0.5-3.0％ by weight on total formulation
Method
The activation time required in the coating system is about 20-30 minute. The typical activation temperature is between 40 and 70 °C. Dispersing equipment such as sand mills facilitate the activation of the product. When it is difficult to achieve a temperature in the suggested range, 1-2% isopropanol can be added to reduce the activation temperature of HT-8600.
Package
Packed in 15kg kraft paper bags.
HT-8600 polyamide wax micropowder is a 100% active, powder polyamide wax thixotropic agent specially designed for solvent-based and solvent-free, high-solids coating systems and inks, adhesives, sealants, greases, etc. This product could be dispersed with heat generated during grinding and establish the thixotropic viscosity, control the sag and prevent sedimentation.
Typical Physical Data
| Composition | Pure Polyamide Wax |
| Appearance | l Off -White Powder |
| Effective Content | l 100％ |
| Particle size（Dv99） | l ≤ 15µm |
| Melting point（℃） | l 120-130 |
| Acid Value | l ≤5 (mgKOH/g) |
Advantages
Ø☆100% active, consequently better cost/ performance.
Ø☆Can effect just dispersed on a heat generating grinder.
Ø☆Strong anti-sagging and maintained anti-settling.
Ø☆Very little trouble such as poor recoating, delamination and the like.
Ø☆No seeding with paints during storage.
Applications
It can be applied to various solvent-based, solvent-free, high-solids systems, especially suitable for heavy-duty anti-corrosion systems such as epoxy and chlorinated rubber coatings.
Addition Level
0.5-3.0％ by weight on total formulation
Method
The activation time required in the coating system is about 20-30 minute. The typical activation temperature is between 40 and 70 °C. Dispersing equipment such as sand mills facilitate the activation of the product. When it is difficult to achieve a temperature in the suggested range, 1-2% isopropanol can be added to reduce the activation temperature of HT-8600.
Package
Packed in 15kg kraft paper bags.
