PRODUCT
- 400-085-9099
- bentonite@zjhuate.com
- www.zjhuate.com
- Zhejiang province Anji County high Yu Zhejiang Tianzi Lake modern industrial park
Bentonite (Inorganic Gel) BP-H654
BP-H654 is a highly purified, non-toxic and odorless silicate mineral.It has good properties of thickening,thixotropic and swelling in highly polar solvent system. BP-H654 has excellent performance of
GENERAL INFORMATION
BP-H654 is a highly purified, non-toxic and odorless silicate mineral.It has good properties of thickening,thixotropic and swelling in highly polar solvent system. BP-H654 has excellent performance of thickening, anti-settling and anti-sagging in water and alcohol ether solvent mixing formulation.
TYPICAL PROPERTIES
APPLICATION
Daily chemicals
Antiseptic thickener
INSTRUCTIONS FOR USE
Pre-gel method, the recommended concentration is 2 % - 5%.
1. Weigh a certain amount of BP-H654 and slowly add it into water with low-speed stirring to avoid caking.
2. When the viscosity increases,adjust the rotating speed to 2000rpm and disperse for 20-30min to fully disperse to form homogeneous gel
3. Set it for 8 hours for future use.
4. Addition levels of BP-H654 are typically between 0.5%-3.0% by weight of the total system.
BP-H654 is a highly purified, non-toxic and odorless silicate mineral.It has good properties of thickening,thixotropic and swelling in highly polar solvent system. BP-H654 has excellent performance of thickening, anti-settling and anti-sagging in water and alcohol ether solvent mixing formulation.
TYPICAL PROPERTIES
COLOR/FORM | Light cream powder |
MOISTURE,% | ≤10.0 |
FINENESS (-200mesh),% |
≥98% |
pH VALUE (2% dispersion) |
5.0—7.0 |
Viscosity(1%)(60rpm) | ≥4000CP |
APPLICATION
Daily chemicals
Antiseptic thickener
INSTRUCTIONS FOR USE
Pre-gel method, the recommended concentration is 2 % - 5%.
1. Weigh a certain amount of BP-H654 and slowly add it into water with low-speed stirring to avoid caking.
2. When the viscosity increases,adjust the rotating speed to 2000rpm and disperse for 20-30min to fully disperse to form homogeneous gel
3. Set it for 8 hours for future use.
4. Addition levels of BP-H654 are typically between 0.5%-3.0% by weight of the total system.