PRODUCT
  • 400-085-9099
  • bentonite@zjhuate.com
  • www.zjhuate.com
  • Zhejiang province Anji County high Yu Zhejiang Tianzi Lake modern industrial park

Rheology Modifier BP-183-A9

  BP-183-A9 belongs to the unconventional type of organoclays group, being an easy-to-disperse, self-activated organoclay.
1.    Advantages:
Ø  High gelling efficiency over low,medium and high polarity organic liquids.
Ø  Easy of incorporation.No need for polar activator or making pregel.
Ø  Consistent in rheology and thixotropy development.
Ø  Easy of dispersion especially in styrene and alcohol solvent. Dust-free addition.
Ø  Good anti-sagging property and anti-sediment property.
Ø  Can replace fumed silica in epoxy resin systems and unsaturated resin systems with better thixotropy performance and more economical price.

2.    Typical Properties:
Color Appearance Density Moisture
(@105,2hrs)
Fineness through 200 mesh Loss on Ignition
( @1000 )
White Free Flowing Powder 1.6g/cm3 ≤4.0% ≥95% ≤40%


 3.    Typical Applications:
Anti-corrosion paint Polyester paint
Industrial paint Solvent epoxy paint
Non-solvent epoxy paint Adhesive
Putties and sealant Varnish

 
 
 
 
 

4.    Incorporations:
BP-183-A9 belongs to the unconventional type of organoclays group, being an easy-to-disperse, self-activated organoclay, BP-183-A9 does not require a chemical (polar) activator to reach the proper level of delamination of the organoclay platelet stacks.

However, in systems like styrene, xylene,200#solvent oil and compund solvent, pre-gel method is also acceptable.

5.    Recommended Levels:
The amount of BP-183-A9 Rheology Modifier required depends upon the type of organic system and the degree of thickening or other properties desired. Addition levels are typically between 0.2%-0.6% based on the total formulation weight. For special purpose, for example, in hand layup unsaturated resin,1-6% is recommended.

6.    International Countertype:  Garamite®1958

7.    Packaging and Storage:
Brown paper packages plus internal polyethylene film bags,or paper packages with valve mouths are used.The weight of each package is generally 25±0.25 kg according to customer demands.