PRODUCT
- 400-085-9099
- bentonite@zjhuate.com
- www.zjhuate.com
- Zhejiang province Anji County high Yu Zhejiang Tianzi Lake modern industrial park
Rheology Modifier BP-183-I
The amount of BP-183-I Rheology Modifier required depends upon the type of organic system and the degree of thickening or other properties desired.
1. Advantages:
High gelling efficiency over low to medium polarity organic liquids.
☆ Ideal thixotropy ,anti-sagging,anti-sediment property.
☆ Imparts particle suspension, preventing hard settling of pigment and fillers.
☆ Exerts strong film reinforce action in organic binder systems.
☆ Good dispersion performance.
2. Typical Properties:
3. Typical Applications:
4. Incorporations:
BP-183-I belongs to the conventional type of organoclay group, which requires mechanical energy, shear forces applied with a goods dispersion equipment, and a chemical (polar) activator to reach the proper level of delamination of the organoclay platelet stacks.
Polar Activator: Dosage of polar activator (such as 95%ethanol, 95%methanol, 95%acetone or propylene carbonate) is 30%-60% by weight of BP-183-I.
It is always recommended to determine the proper level of addition by experiment. Either defect or excess of chemical activator would result in poorer viscosity development.
5. Recommended Levels:
The amount ofBP-183-I Rheology Modifier required depends upon the type of organic system and the degree of thickening or other properties desired. Addition levels are typically between 0.2%-2.0% based on the total formulation weight.
6. International Countertypes: Bentone®38, Claytone®40, Tixogel®VP-A
7.Packaging and Storage:
Brown paper packages plus internal polyethylene film bags,or paper packages with valve mouths are used.The weight of each package is generally 25±0.25 kg according to customer demands
High gelling efficiency over low to medium polarity organic liquids.
☆ Ideal thixotropy ,anti-sagging,anti-sediment property.
☆ Imparts particle suspension, preventing hard settling of pigment and fillers.
☆ Exerts strong film reinforce action in organic binder systems.
☆ Good dispersion performance.
2. Typical Properties:
| Color | Appearance | Density |
Moisture (@105℃,2hrs) |
Fineness through 200 mesh |
Loss on Ignition ( @1000℃ ) |
| Light white | Free Flowing Powder | 1.7g/cm3 | ≤3.5% | ≥98% | ≤40% |
3. Typical Applications:
| ●Acrylic paint | ●Solvent epoxy paint |
| ●Alkyd paint | ●Zinc-rich paint |
| ●Baking paint | ●Nitro lacquer |
| ●Foundry paint | ●Adhesive |
| ●Polyester paint | ●Lubricating grease |
| ●Road paint | ●Cosmetics |
| ●Silica paint | ●Inks |
4. Incorporations:
BP-183-I belongs to the conventional type of organoclay group, which requires mechanical energy, shear forces applied with a goods dispersion equipment, and a chemical (polar) activator to reach the proper level of delamination of the organoclay platelet stacks.
Polar Activator: Dosage of polar activator (such as 95%ethanol, 95%methanol, 95%acetone or propylene carbonate) is 30%-60% by weight of BP-183-I.
It is always recommended to determine the proper level of addition by experiment. Either defect or excess of chemical activator would result in poorer viscosity development.
5. Recommended Levels:
The amount ofBP-183-I Rheology Modifier required depends upon the type of organic system and the degree of thickening or other properties desired. Addition levels are typically between 0.2%-2.0% based on the total formulation weight.
6. International Countertypes: Bentone®38, Claytone®40, Tixogel®VP-A
7.Packaging and Storage:
Brown paper packages plus internal polyethylene film bags,or paper packages with valve mouths are used.The weight of each package is generally 25±0.25 kg according to customer demands
